Yeti Cycles SB100 TURQ T2 Mountain Bike - 2020, X-Large
Condition: Certified Pre-Owned
Fit Range: 6'2" - 6'5"
Shipping & Assembly
- Bikes arrive tuned and mostly pre-assembled
- Torque tool & video guide included
- Get riding in 15 minutes
Please note that any duties, taxes, or surcharges as required by Canadian customs and provincial authorities will be the buyer's responsibility. Shipping to Canadian addresses may take longer than expected due to customs.
We'll happily purchase this bike back from you when you're ready for your next upgrade. A TPC buyback offer is guaranteed for 18 month on all qualifying bikes.
If this bike isn't perfect for you, our Ride Guides will help you find the right one.
Uncompromising XC Crusher
- ENVE M6 Carbon handlebar
- Wins on climbs, descents, and between the tape with ease
- 100mm of grippy, poppy rear travel to get through the rough stuff
- Switch Infinity suspension brings unmatched efficiency and traction
- Cross country geometry is nimble and capable on the downhill
- Older version of the new SB115
- New bottom bracket
- Light wear and tear from cable rub, heel rub & chain
- Light scratch on the inner drive side chainstay, down tube, & non-drive side seatstay
- Light paint chip on the down tube & top tube
|Frame Material||Carbon Fiber|
|Drivetrain||SRAM, 1x12 spd|
|Weight||26 lbs 6 oz|
|Fork||FOX Factory Step-Cast Series 34 FLOAT|
|Rear Shock||FOX Factory Series FLOAT DPS|
|Rear Shock Travel||100mm|
|Brakes||Shimano XTR M9000, Disc Brakes - Hydraulic|
|Shifters||SRAM X01 Eagle, Mechanical|
|Rear Derailleur||SRAM X01 Eagle|
|Bottom Bracket Shell||Press fit|
|Crankset||SRAM Eagle, 32t, 175mm|
|Cassette||SRAM XG-1295, 10-52t|
|Handlebar||ENVE M6 Carbon, 780mm|
|Stem||ENVE Carbon, 31.8mm x 70mm, 6°|
|Seatpost||UNO Advanced Project Alloy, 30.9mm|
|Saddle||WTB Yeti Silverado|
|Front Axle Spacing||15x110mm (Thru-Axle)|
|Rear Axle Spacing||12x148mm Boost|
|Wheelset||DT Swiss XR 1700 Aluminum Tubeless Ready, DT Swiss 350|
|Front Tire||Maxxis Dissector 3C MaxxTerra EXO TR, 29" x 2.4"|
|Rear Tire||Maxxis Rekon 3C MaxxTerra EXO TR, 29" x 2.4"|
|Tubeless Compatibility||Wheels are tubeless compatible but ships with tubes installed|
6'2" - 6'5"
|A. Effective Top Tube||657.2 mm|
|B. Seat Tube||495 mm|
|C. Seat Tube Angle||74°|
|D. Head Tube Angle||67.8°|
|E. Head Tube||144.7 mm|
|F. Stack||647.2 mm|
|G. Reach||472.1 mm|
|H. Standover Height||724 mm|
|I. Saddle Height Range||N/A|
Inspected. Tested. Trusted.
What is CPO?
CPO bikes are gently ridden bikes that have been meticulously inspected, restored and serviced. Every CPO bike is cleaned, tuned and tested in our top-of-the-line Colorado headquarters. Road, mountain, ebike or gravel, TPC services each bike over 8 phases and 141 points of inspection.
Bikes are meant
to be used.